When it comes to candle making scents the best possible thing to use are oils. Fragrance oils mix well in to the wax and they provide a strong and recognizable scent that fills the room and even the home as the candle burns. You do, however, have other options around your home if you do not want to buy oils anytime soon. You can simply use different extracts such as almond, lemon, or vanilla extract. These will do the job and create a pleasing fragrance for your candles. This article is going to focus on using oils for candle making scents.
If you want to try something beyond the standard aluminum mold, there are a number of options. One choice is polyurethane candle making molds. These are cheaper than their silicone cousins. They are flexible, but do not stretch that well. The polyurethane tends to have a strong aroma, and this sometimes gets into the candle. So, if you’re intending to make a scented candle, you do not want the aroma to be contaminated. But, if you use a releasing agent as with the aluminum molds, you can create some great pillar and taper candles.
I had borrowed a book on Aromatherapy from a friend of mine. After reading through it, I decided that for the first batch of scented candles, I wanted to create candles that promoted calmness… those that would relieve stress. After all, the holidays are just around the corner, and times can get a little hectic. I started as I always had, by cutting my block of paraffin into small flakes. This is a technique that is always recommended as the wax will melt evenly and consistently. I made my own double boiler back when I began making candles, and I still use it to this day. It is simply a big pot, and an old coffee can. The pot is filled with water and the coffee can sits in the middle. I heat up the water to a low boil, and put in the wax.
The next part of the Candle making instructions involves the shape and size of the candles. You can easily design the model to suit your likings and preferences with the use of appropriate moulds. And the next step is to put the right fragrances into the wax for the perfect scented candle. Make sure that the soy wax suits well with the fragrance to produce the desired smell. The average measurement is to mix around 16 ounces of soy wax with 1 fl ounce of scented oil.
Step # 1. Gather all of the supplies that you need: soy wax or beeswax, cotton wick, wick tab, candle mold, double boiler, candy thermometer, carving knife, and a spoon.
Fifth candle making tip – This is specifically for those of you who want to sell their candle work. An important aspect of marketing is always packaging. Its the look of a product when you first notice it. Presentation, your first impression, all of this is important. What are you trying to accomplish with packaging? You want to attract attention. Get them looking at the product with their eyes wide open in amazement. You’ll get a sale more often than not.
Prepare your molds! I know; big surprise. Rub a little vegetable oil on the inside of one of the bowls and on the outside of another. Melt some white wax to the proper temperature and pour it into the first bowl, then insert the second bowl until there is only a 1 inch gap between them, and let cool. After it has cooled, remove the inner bowl; this will leave you with a white shell.
One more thing to be kept in mind is never to heat the wax over 200 or 210 degrees. Using a thermometer will make your life easier. A candy thermometer should be good enough. The Next important step, as mentioned in this, is to prepare your containers or molds. Once these are ready, you have to start melting the wax up to about 200 degrees. If you want, you can add some fragrance or color. Once your wax has been melted, pour it into your container or mold and let it cool. Take extra care and place a wick right in the center when the wax cools down a little. You could even use a Popsicle stick or a tongue depressor to position it correctly. As per candle making instructions, the correct positioning of the wick is very important for your candle to burn evenly.